Editor’s Note: Roger Gant of Corinth, Mississippi, has fished Pickwick Lake on the Tennessee River for more than 40 years. Some fishermen haven’t recognized Pickwick Lake, located on the Alabama/Tennessee/Mississippi border, as a crappie lake. However, Gant guides on Pickwick Lake more than 200 days a year and consistently catches good limits of slab crappie.

* Have the proper equipment for the time of the year you plan to fish. Many crappie fishermen don’t take the time they need to make sure they have the very-best equipment they can purchase for the time of year they plan to fish. If you use too large a line, your jig will float too high in the water for crappie to take it. If your line doesn’t have the strength you need, you’ll break the line when you set the hook. I’ve found that I can set the hook hard on 8-pound-test MagnaThin line (http://www.stren.com/stren-line-monofilament-stren-magnathin/stren-magnathin/1347942.html), yet the small line will cut through the water so that my jigs run at the proper depths. You need an extremely-soft rod with enough backbone to hold itself upright. When sight-fishing for crappie, I look for the bite on the tip of the rod. So, I must have a sensitive rod to show me even the lightest crappie bite. I like a B‘n’M 6 1/2-foot crappie jig pole (https://www.bnmpoles.com/c-13-bucks-series-jig-poles.aspx).

I fish with Quantum’s casting reels (https://www.quantumfishing.com/reels) that have bearings in them and reel smoothly. I use casting reels on spinning rods because most casting rods have a trigger or a hump on the butt of the rod. But, a spinning rod has a straight handle. When the rod’s on the deck of the boat, the reel faces down. I place my rod and reel in this position when I use my style of trolling. I also use casting reels, so I can count the line down to the proper water depth to catch the fish. I put a white piece of tape on the rod 1 foot from where the line comes out of the reel. My fishermen can pull the line off the reel out to where the line crosses the white tape. Each time an angler pulls the line to the white tape, he or she knows his jig will go down one more foot in the water. By having the jigs troll at exactly the water depth where the crappie hold or slightly above the crappie, then we catch more crappie. I believe you can pull line off a bait-casting reel easier and more accurately than you can a spinning reel.

* Fish in the exact depths where the crappie hold to catch more crappie. By constantly watching your depth finder and searching for fish and structure, the depth finder will tell you at what depth you need to troll your jigs. Once I determine the depth of the structure I see on the depth finder, I know how deep to tell my fishermen to let their jigs down, so they’ll pass just above the structure. If I see crappie holding above the structure on my depth finder, I can tell my fishermen how much line to pull off, so that the jigs will pass at the depth where the crappie are holding or slightly above them. If I see crappie 15-feet deep, I can tell my fishermen to let their jigs touch the water and then pull off 14 feet of line. I know that when I slow troll, those jigs will pass about a foot above the crappie. If the fish don’t take the bait, I may tell my fishermen to pull off 1/2-foot of line. Because of the tape, the fishermen know how far to pull the line and can get the jigs down closer to the crappie.

To learn more about crappie fishing with Roger Gant, call him at 731-689-5666 or 662-287-2017, or go to http://visitmississippi.org/events-and-points-of-interest/super-pro-guide-service-26669.

To learn much more about crappie fishing, get John E. Phillips’ Kindle eBooks, and print and Audible books by going to https://johninthewild.com/books/#crappie or to www.barnesandnoble.com for Nook books. To receive and download for free “The Crappie Catchers’ Cookbook,” by John and Denise Phillips, go to https://johninthewild.com/free-books.

Tomorrow: Know Where Crappie Are with Roger Gant